Porsche Pre Purchase Inspection in Dubai
Buying a used Porsche with an uncertain history or an existing inspection report? Agree checks for its exact model, engine and gearbox. Our written findings separate confirmed faults, repair priorities and unanswered questions, helping you decide whether to proceed, negotiate or request another test.
- Itemised checklist
- Written report for the buyer
- Price agreed before booking

Use the findings to make a buying decision
An independent inspection should give the buyer an objective record of the agreed checks. The buyer books the inspection, the buyer pays for it, and the report goes to the buyer. We are not selling the car. The report distinguishes findings from optional repair quotations. Any known relationship with the seller or referral arrangement should be disclosed before booking, and the buyer decides where any later repairs are done.
If a seller or dealer suggests their own garage for the check, you can still choose an independent inspection. If access is restricted, the report records what remains unknown rather than treating the car as fully checked.
Where the inspection fits in your purchase
The inspection is most useful after you like the car and before any deposit you cannot get back. These are the five points on that road.
- 1
Shortlist the car
Your model and the car location are enough to start. The listing and chassis number are useful optional details.
- 2
Agree access
The seller agrees a time, a cold engine where possible, and a road test.
- 3
Inspection day
The car is checked area by area against the itemised list below.
- 4
Report review
We walk you through the findings, photos and any costs to expect.
- 5
Your decision
You buy, negotiate, ask for more testing or walk away with your reasons in writing.
Exactly what is checked, area by area
The checklist contains 66 entries across nine areas. The agreed inspection records each as checked, concern found, not checked or not applicable. Model, equipment, access and seller permission determine what can be completed. A listed item is not a promise of dismantling or a specialist test.
Open checklist and sample report PDF Download the seven page PDF
Documents and history
- Chassis number matches the registration card and the car
- Service records and stamps compared with the mileage
- Mileage plausibility against wear and records
- Previous repairs and invoices the seller can show
- Outstanding recall or campaign questions to raise with a dealer
- Number of keys and their function
- Owner manual, spare wheel or repair kit, tools
Body and paint
- Paint readings on accessible compatible panels, with substrate and limitations recorded
- Panel gaps and alignment
- Signs of respray, overspray and masking lines
- Stone chips, scratches and lacquer condition
- Glass, seals and windscreen condition
- Lights, lenses and moisture inside units
- Wheel arches, sills and door shuts
- Bonnet and boot structure and fixings
Underbody and leaks
- Oil, coolant and gearbox fluid leaks
- Underbody damage, scrapes and repairs
- Chassis rails and mounting points
- Exhaust system and heat shields
- Coolant pipes and radiators where visible
- Undertrays and fixings
- Corrosion on fixings and lines
Engine
- Cold start behaviour and idle
- Oil level by the prescribed method and accessible signs of contamination
- Coolant level and condition
- Belts, hoses and visible ancillaries
- Unusual noises at idle and under load
- Smoke at start and on acceleration
- Engine mounts
- Model specific engine checks agreed in the quote
Gearbox and drivetrain
- Gear selection at rest and on the move
- Shift quality, hot and cold where possible
- Clutch engagement on manual cars
- Driveshafts, joints and boots
- All wheel drive behaviour where fitted
- Gearbox fault memory review
Suspension, brakes and tyres
- Shock absorbers, mounts and leaks
- Bushes, arms and ball joints
- Steering play and noises
- Air or active suspension function where fitted
- Accessible brake pad and disc assessment, with measurements where the agreed access permits
- Brake fluid service history and agreed condition test
- Tyre tread, age codes and uneven wear
- Visible wheel damage, with measured runout only if separately agreed
Electrics and scan
- Fault memory read across all reachable control units
- 12 volt battery assessment using the applicable vehicle procedure
- Warning lights at start and while driving
- Lights, wipers and horn
- Windows, mirrors and central locking
- Parking sensors and cameras
- Engine speed history where it can be read on the model
Interior and equipment
- Seats, adjustment and wear
- Air conditioning cooling performance
- Infotainment, navigation and audio
- Roof, convertible top or sunroof operation
- Water marks, damp carpets and smells
- Fitted options against the specification
- Visible belt condition and airbag warning status, not certification of hidden restraints
Road test
- Pulling away and low speed manoeuvres
- Acceleration and power delivery
- Braking straight and smoothly
- Steering feel and straight line stability
- Noises over bumps
- Gearbox behaviour under load
- Temperatures and warnings during the drive
- Recheck for leaks and codes after the drive
What we look at first on your model
The 66 entries apply to every car. On top of them, each generation has known weak points worth extra attention. This matrix shows what we prioritise, which records help most, and where to read more. The exact engine and fitted equipment are confirmed from the VIN before the visit.
IMS bearing records and engine number, smoke at start, signs of bore scoring on one bank, rear main seal and front radiator condition
IMS invoices and oil change history
PDK shift quality and fault memory, coolant leaks, coil packs on 991.1, engine mounts and engine speed records
PDK oil service date and software updates
Software level, open campaigns checked by VIN, calibration warnings for cameras and chassis, PDK behaviour
Dealer campaign printout and service records
Coolant pipe joints, engine speed records, clutch wear and signs of track use
Track use history and coolant pipe invoices
The same IMS and bore checks as the early 911, roof and drain condition, coolant leaks
IMS invoices and roof service records
PDK or manual clutch behaviour, coolant leaks, fault memory, brake and tyre condition
Service records and PDK oil date
Valley coolant pipes on the V8, prop shaft centre bearing, transfer case behaviour, air suspension and coils
Coolant pipe invoice and transfer case history
Transfer case lurch or shudder, timing cover leaks on V6 turbo and V8, front air strut seams on 2023 cars, coolant valve
Fluid service dates and campaign printout
Transfer case jerk, coolant regulator housing, V6 oil filter housing seal, fuel pump flange recall on cars built before March 2018
Recall printout and service records
Air suspension fill time and leaks, water pump on 2010 to 2013 cars, V6 head cover leaks, PDK and cluster software
Air suspension and gearbox service records
12 volt battery, charging port and cable, tyres and brakes, open recalls. High voltage battery health is referred to a Porsche Centre
Recall status and the battery health report from Porsche
Not every listed issue affects every car. A priority check looks for evidence, it does not assume the fault is present.
Extra checks depend on the engine and findings
Model names alone do not identify every engine or fitted system. We use the vehicle details and initial findings to decide whether an additional test would answer a useful buying question. Each added test needs an agreed price, access and seller permission.
Engine speed history
Where supported, the DME report records ignition counts in defined ranges and operating hours at the latest events. Counts are not simply a number of separate incidents. Thresholds and interpretation depend on the exact engine and control unit, so one RPM chart cannot cover all 986, 996, 987 or 997 variants.
An event alone does not confirm engine damage. The record, event timing, symptoms and applicable Porsche guidance determine whether further testing is appropriate. Missing or unreadable data is recorded as a limitation.
Borescope and cylinder sealing
A borescope can inspect accessible cylinder surfaces on suitable combustion engines. Images need cylinder identification and a description of what was visible. It does not establish every bearing, ring or internal engine condition.
Compression or leak down tests may help investigate a concern but are separate operations. Engine variant, symptoms and access determine their relevance. A model wide statement that every 911, Boxster or Cayman needs the same test would be misleading.
Intermediate shaft records
For an applicable engine, invoices can help identify previous intermediate shaft bearing work. Engine identity and design matter, and an upgrade is not universally applicable to every vehicle carrying an M96 or M97 label.
A routine external inspection cannot certify a hidden bearing as healthy. Missing invoices mean the work is unverified, not proof of failure or proof that replacement is required.
For an example of why applicability matters, Porsche technical information on specified 996 and 997 Turbo overspeed records uses application specific ranges and interpretation. It is not a universal chart for all Porsche engines.

Codes found, faults confirmed and items to watch
A fault code is a message from a control unit, not proof of a broken part. Old codes can stay stored long after a repair, and one fault can leave codes in several units. That is why the report sorts every finding into one of three groups.

Scan codes found
The report lists retrieved codes with their control unit and available status, such as current or historic. A code identifies a recorded condition but does not by itself prove that the named component needs replacement. Unsupported or inaccessible units are recorded.
- Recorded as found
- Initial scan saved before any agreed clearing
Confirmed faults
Only problems backed by a test, a measurement, a visible defect or a road test result. Each one comes with what it usually involves to fix.
- Evidence stated
- Repair scope explained
Items to monitor
Things that work today but are worn or due soon, such as tyres, brakes or a service, so you can budget for them after purchase.
- Expected timing
- Useful for negotiation
Three ways to plan an inspection budget
These are illustrative quotations, not completed customer jobs or fixed offers. Totals include a VAT allowance. The actual quote depends on the vehicle, agreed access and tests.
2018 Macan standard assessment
Example total AED 650
Workshop visual and functional checks, supported scan, accessible paint readings, lifting, permitted road test and written report. No parts are replaced. Specialist internal engine testing and extensive cover removal are excluded.
2007 911 with cylinder inspection
Example total AED 1,400
An illustrative AED 800 standard inspection plus AED 600 for an agreed accessible cylinder borescope examination. Engine identity, plug access and seller permission must be checked. Compression, leak down, seized fixing work and replacement parts are excluded.
2021 Taycan general condition check
Example total AED 850
Applicable body, cabin, chassis, 12 volt, supported scan and permitted road test checks with a written report. Combustion engine entries are marked not applicable. Traction battery health certification, high voltage dismantling and a guaranteed range assessment are excluded.
What your report looks like
This is the report layout with its field names, not a real customer car and not invented findings. Every report uses the same fields so you can compare cars. The downloadable companion includes a printable checklist and an example completed report with measurements, access limits and follow up decisions.
Open checklist and sample report PDF Download the seven page PDF
- Code and description as read
- Control unit and status, current or historic
- What the code alone does not prove
- Finding, location and photo number
- Evidence, such as a test, measurement or road test
- Likely repair scope and next step
- Item and the reading taken
- Expected timing for the work
- Budget note you can use to negotiate
Proceed, negotiate, test more or walk away, with the reasons written beside it and a list of every check that could not be completed on the day.
A real report page, shown with permission
A real anonymised page from a completed inspection will sit here once an owner agrees. The chassis number, plate and personal details are hidden. Until then, the field layout above and the downloadable example show exactly what you receive.
- Photos numbered to match each finding
- Readings with the tool and conditions noted
- Checks not completed, with the reason

Four verdicts and what each one means for you
The verdict supports your decision. It is our professional reading of the condition on the day, not a guarantee about the future of the car.
Proceed
No significant concerns found within the completed checks. Consider the limitations and planned maintenance before deciding. Unchecked areas cannot be treated as passed.
Negotiate
Confirmed faults or near term costs that justify a lower price or repairs before handover.
Test more
A finding needs a deeper test, such as a borescope or leak down, before anyone can say more.
Walk away
Major faults, signs of serious damage or history that does not add up. The cost or risk outweighs the price.
What an inspection cannot see
A standard inspection is non invasive. Wheel and cover removal are not assumed. Any dismantling or additional test needs cost approval from the buyer and permission from the seller, so some things stay hidden. The report names these limits so you know exactly what the verdict covers.
Inside the engine
Bearing wear, piston rings and internal gearbox wear cannot be seen without dismantling or specialist tests.
The future
A car that is sound today can still develop faults later, especially in heat and dust.
Hidden history
Repairs done well, without records, may not show. Official history reports are separate from the inspection.
High voltage batteries
Hybrid and electric battery health needs its own assessment and is not part of a standard inspection.
Restricted access
If the seller limits the road test, a cold start or lifting the car, the report says what could not be checked.
Registration tests
An official registration inspection is a separate service with its own centre and fees.
Covered on the day, or a separate test
Each system below shows what the standard inspection covers, what needs a separate quoted test or a specialist, and the guide that explains why. The report marks which of these were done on your car.
- 01Engine internalsIn the standard check
Cold start, idle, noises, smoke, leaks, fault memory and engine speed records where the model supports them
Bore scoring and borescopeSeparate test or specialistBorescope, compression, leak down or oil analysis, each quoted first
- 02IMS bearing on M96 and M97In the standard check
Engine number, records of previous IMS work and the oil you can see
IMS bearing guideSeparate test or specialistOil filter inspection, or a look with the gearbox removed
- 03Crankcase ventilationIn the standard check
Smoke at start, idle quality and related fault codes
Air oil separator guideSeparate test or specialistA crankcase vacuum test with a gauge
- 04PDK and TiptronicIn the standard check
Shifts on the road test, behaviour hot and cold where possible, gearbox fault memory
PDK problems guideSeparate test or specialistAdaptation and actuator data where the tool supports it, fluid condition
- 05BrakesIn the standard check
Accessible pads and steel discs, fluid records, warning lights
PCCB and steel brakesSeparate test or specialistPCCB wear needs a weight check or the Porsche tool, wheel removal is extra
- 06All wheel driveIn the standard check
Tyre match, a tight turn road test and fault memory on Cayenne and Macan
Transfer case shudderSeparate test or specialistLive drive data and a fluid check
- 07High voltage systemIn the standard check
12 volt battery, charging port, cable and recall questions
Taycan repairSeparate test or specialistNot done here. Battery health and high voltage work go to a Porsche Centre
Agree these with the seller first
- A time when the engine has not been started
- Permission for a road test
- All keys and the registration card
- Service records and repair invoices
- Permission to lift the car if possible
- Any add on test you have chosen
Most delays on inspection day come from access, not from the car. A cold engine shows starting behaviour honestly, a road test is where many faults appear, and records let us compare the story with the car.

Paint measurements with their limits recorded
Paint thickness measurements can support an assessment of previous refinishing, but neither high nor normal readings alone prove accident history or originality. Readings are interpreted with the panel substrate, coating condition, visual signs and available records.
- Reading per panelMultiple readings are recorded in microns on accessible panels compatible with the instrument. Plastic, composite or inaccessible areas are identified when they cannot be measured.
- Gaps and sealsGaps, fasteners and seals add context. Normal appearance does not rule out a concealed or well finished repair.
- ContextTouch ups and refinishing are described without assuming their cause. Further body assessment may be needed where damage or repairs remain uncertain.
The diagram shows sample marking only. Your report shows the readings taken on your car.
Porsche pre purchase inspection questions
How much does a Porsche pre purchase inspection cost in Dubai?
Allow approximately AED 525 to 945 including VAT as a budget for the standard workshop scope described above. This is not a fixed offer. Extra engine tests, extensive removal work, travel and specialist battery assessments are separately quoted.
How long does the inspection take?
A standard Porsche inspection usually takes around one and a half to three hours. Add on tests, a cold start wait or limited access can make it longer.
What is included in your inspection checklist?
The downloadable checklist lists 66 entries across nine areas, with results marked checked, concern found, not checked or not applicable. This independent buyer inspection is separate from the Porsche Approved 111 point programme and does not confer Porsche Approved certification.
Can the inspection be done at the seller location?
Share the car location to check appointment options. A workshop visit is needed for lift dependent checks. Any seller location visit must be agreed separately with its travel fee and reduced scope stated in writing. A ground level visual check is not equivalent to a lifted underbody inspection.
Is a fault code on the scan a reason not to buy?
Not by itself. A code may need further investigation even if the symptom is absent. The report records its available status, supporting observations and any recommended next test. A clean scan does not prove that all mechanical systems are healthy.
Do you check for accident damage?
Yes. Paint readings, panel gaps, seals and underbody condition are checked for signs of repair, and the report explains what the pattern suggests.
Can you tell if a manual Porsche has been over revved?
On supported vehicles the control unit records ignition counts by engine speed range and event operating hours. Availability and interpretation depend on the exact engine and software. A record is not a standalone diagnosis of damage.
Is a borescope check worth it?
It can be useful where the engine variant, symptoms or records justify internal cylinder inspection. It is an optional, separately quoted test with access limits and seller permission. It cannot certify the entire engine as healthy.
Can I attend the inspection?
Yes, you are welcome to attend. If you cannot, you receive the written report and photos, and we go through the findings with you by phone.
Does the inspection include a road test?
Yes, when the seller allows it and it is safe. If a road test is refused, the report states it, because many faults only appear while driving.
Can the report help me negotiate?
Yes. Confirmed faults and items due soon, with their usual repair scope, give you clear reasons for a lower price or for repairs before handover.
Do you inspect hybrid and electric Porsche models?
The checklist is adapted to the actual powertrain. Combustion engine entries are not applicable to a Taycan. A general inspection does not include traction battery state of health certification, opening high voltage components or guaranteed driving range. Charging checks and any specialist battery assessment need an expressly agreed scope.
What does a used Porsche inspection not cover?
The standard check does not open the engine or gearbox, test high voltage battery health, measure PCCB disc wear or scope the cylinders. Those need a separate quoted test or a specialist, and the report lists every check that was not done.
Which checks matter most on my model?
It depends on the generation and engine. Early 911, Boxster and Cayman cars need IMS and bore checks, later cars put more weight on PDK, cooling and software, and SUVs need transfer case and air suspension checks. The matrix above lists the priorities for each model.
Is the inspection a guarantee?
No. It is a professional record of the condition on the day of inspection. It reduces risk but cannot predict every future fault.
Should I check recalls as well?
Yes. Open recalls are checked by a Porsche dealer using the chassis number. We note any campaign questions for you to raise with them.
What should I send when booking?
Your model and the car location are enough to begin. A listing link and preferred timing help. The chassis number, service records and seller details can be supplied later when needed.
Know the car before you pay for it
Share the Porsche model and car location. We will confirm the inspection scope, price and report arrangements in writing so you can take the next step with clear expectations.
- Itemised checklist
- Codes separated from faults
- Verdict in writing
An enquiry is not a booking. The appointment is confirmed with you directly. Porsche Repair Dubai is an independent workshop and is not part of the Porsche Centre dealer network.
