Two matched front blades
Quote the selected brand and part number, both blades, fitting, wet wipe and park checks, basic washer operation and VAT.
Streaks, smears or damaged rubber need a blade and glass check. We match the front pair or rear blade to your model, year, body and drive side, then confirm the fitted price and availability. Wipers that do not move or park correctly need a separate assessment before replacement parts are recommended.

Ask for a written AED total for your exact vehicle before booking. Current fitted prices and stock depend on the selected blade. Overseas retail prices are not local fitting prices.
Quote the selected brand and part number, both blades, fitting, wet wipe and park checks, basic washer operation and VAT.
Confirm which side, whether the blade is sold individually and whether the other blade still wipes correctly.
Confirm the body and rear arm. Request the blade, fitting, rear wash and wipe checks and VAT as a separate line.
Motor, linkage, wiring, washer pump and sensor repairs are not included in a blade change. Agree diagnostic scope and cost first.
Before booking, confirm stock, brand, part number, fitting time and the total including VAT. For supply only, confirm the part price separately. Request applicable warranty duration, defect cover, fitting cover, exclusions and claim steps before approval. No universal warranty period or immediate availability is promised.
The symptom tells us where to look. Rubber problems show on the glass. System problems show in how the arm moves, stops or parks. We sort your complaint first, so the quote matches the real fault.
Inspect only with the wipers switched off and the arms in the access position specified by your vehicle manual. Hold the arm securely. These signs help distinguish damaged rubber from glass contamination or an arm problem.
Flexible and even along its length. Confirm performance with a wet-screen test.
Sun and heat stiffen the rubber and fine cracks open along the edge.
The edge has worn round, so a film of water stays behind in bands.
Blade skips or lifts at speed. Can be the blade, the arm tension or the arm angle.
Start with model, model year and the glass you need cleared. The VIN can follow privately when required to confirm the current part number. No generic size or catalogue example on this page is a stock guarantee.
| Request | What we need | What must match |
|---|---|---|
| Front pair | Model, year and left or right hand drive | Driver and passenger lengths, connector, curvature and spoiler orientation |
| Single front blade | Which side is damaged and condition of the other blade | Individual availability and compatibility with the remaining blade |
| Rear blade | Body style and whether a rear wiper is fitted | Rear arm connector, blade profile and current application |
| Imported or modified car | Drive side and any replacement arm details | Actual arm and current catalogue application, not model name alone |
911, Boxster, Cayman, Cayenne, Macan, Panamera and Taycan fitments vary by generation and equipment. Petrol and electric models with a shared name must be identified separately. Rear-wiper availability depends on the actual body and specification.
Some wiper arms park beneath the bonnet edge. Give them the correct clearance before lifting.
Use the service-position instructions for your car. Switch off automatic wiping and keep hands clear of the mechanism.
Never force an arm past the bonnet or let an arm without its blade spring back onto the glass.
Follow the vehicle manual and blade maker’s guidance for cleaning and fitting. There is no single lever sequence for every Porsche.
Fitting a blade looks simple, and on most cars it is. The checks around it are what stop a squeal, a loose blade or a scratched screen a week later.
Chassis number read, left or right hand drive confirmed, front pair and rear blade matched to the body.
Arms raised the correct way for your model, never prised up from the park position.
Glass cleaned so the new edge is not judged on an old film of grime or wax.
Blade engaged until the lock clicks, then pulled gently to confirm it is held.
Arm nut, spring tension and blade angle looked at, because a tired arm can make a new blade chatter.
Washers and all wiper speeds run, park position checked, and the result shown to you.
A new blade on a dry, dusty screen still scratches and smears. So every blade job includes a quick look at the washer side.
A stopped, slow or incorrectly parked wiper needs a system check. A new rubber blade may not solve the problem.
Check for obstruction, excessive mechanical load, loose arm mountings and linkage faults.
Assess supply, ground, wiring and control signals for the fitted system before condemning the motor.
A humming pump does not prove fluid reaches the glass. Check actual delivery, restrictions and leaks.
Stop safely and arrange assistance. Do not continue in rain with impaired visibility. Keep hands away from powered arms and linkage.
The workshop confirms the fault and quotes the repair before approval. Motor and linkage replacement are not part of a blade change.

Choose by confirmed application and specification. A supplier brand is not proof that a retail blade is identical to the Porsche-boxed product. The quote should identify the actual brand, part number, drive-side application and quantity.
Confirm availability and the exact connector before booking. An adapter must be specifically approved for the blade and arm combination. A generic length match alone is insufficient.
Follow the fitted blade and vehicle manual. Cleaning products and wiping methods differ by blade coating and generation.
Use the washers before wiping a dusty screen, so grit is lifted, not dragged.
Shaded parking reduces direct sun exposure. Inspect the rubber condition rather than assuming low use means little wear.
Check the spray pattern for your fitted system. Do not force or probe a nozzle without the correct procedure.
Use the service position, and never let an arm snap back onto the glass.
A quick look at the edge before and after the rainy months avoids surprises.
With these, we can confirm the part, the price and whether the job is blades only or a fault that needs testing.
Short answers to what owners ask us most. Call or WhatsApp if your question is not here.
Follow the interval and care instructions in your model-year manual. Inspect regularly and replace damaged or poorly wiping blades promptly. Heat, contamination and age can affect rubber even when the wipers are rarely used.
Usually a dirty or waxed screen, a wrong blade length, or an arm with weak spring tension. We clean the glass and check the arm before blaming the blade.
Yes, on many models. For example, the 991 and 718 front pair has one part number for left hand drive and another for right hand drive. We confirm the drive side by chassis number.
Most do not. The 991 parts catalogue does list rear wiper parts for some cars, so we check your chassis number rather than assume.
No. Wipers that do not move point to the switch, fuse, relay, motor, linkage or control side. We test those in order and quote the proven fault.
Possible causes include a park-position fault, wiring, control, mechanical obstruction or an incorrectly mounted arm. Confirm the cause by testing the fitted system before replacing parts.
Yes, using the service position in your owner manual. The method varies by generation, so do not use a lever sequence from a different model. Hold the arm so it cannot fall back onto the glass.
Yes, we can supply the correct part for your chassis number. Fitting is quick, and fitted jobs include the washer and park checks.
A genuine set is matched to the arm and screen of your model. An original supplier blade with the same specification can be good value. We tell you which grade you are getting.
Dirt, a chip near the sensor or a sensor pad disturbed during glass work can confuse it. We clean and check the sensor area and read the fault memory.
A humming sound does not confirm useful pump output. Low fluid, a restricted inlet or jet, a damaged hose, disconnected joint or pump fault are possibilities. Test flow and trace the cause.
A torn blade can let the metal frame touch the glass, and a blade dragged over sand can mark it. Replacing a damaged blade early is much cheaper than glass.
Blade fitting is quick on most models. We confirm the expected time when you book, and fault diagnosis takes longer because it involves testing.
Yes. Fluid level, pump, jet aim and every wiper speed are checked, and park position confirmed, before the car is handed back.
Reviewed on 29 October 2026. Your vehicle-specific manual and fitted blade instructions take precedence.
Start with your model, year and what the wipers do. We confirm the right blades for your car, or test the system if the fault is not the rubber.
An enquiry is not a booking. The appointment is confirmed with you directly. Porsche Repair Dubai is an independent workshop and is not part of the Porsche Centre dealer network.