Door cards and armrests
Armrests split along the stitching and door card inserts fade or lift. Inserts can be re covered, armrest leather can be replaced, and loose door card clips are renewed while the panel is off.
Restore worn seats, sagging headliners, door cards and cabin trim with a repair plan for the whole interior. Compare material and repair options, then approve an itemized estimate before work starts.

Use these market-based estimates to plan your budget. They include the described materials, labor and a 5% VAT allowance. They are not fixed workshop offers. Inspection and your material choice determine the written total.
| Work and unit | Estimated total | Included scope and limits |
|---|---|---|
| One seat cover | AED 2,000 to 4,800 per seat | Suitable replacement cover, normal removal and fitting. Foam, motors and safety components extra. |
| Bolster foam repair | AED 750 to 1,900 per seat | Local support restoration and refitting a reusable compatible cover. New cover and frame repairs extra. |
| Headliner recovering | AED 1,800 to 4,500 per roof lining | New suitable fabric on a sound board, removal and refitting. Board, roof blind and leak repairs extra. |
| Door insert or armrest | AED 600 to 1,600 per item | One ordinary trim insert or armrest recovered and fitted. Complete door card, switches and airbag areas excluded. |
| Four-door cabin retrim | AED 8,500 to 22,000+ per defined package | Planning allowance for front and rear seat covers with four door inserts. Dashboard, headliner, carpets and safety components are separate. |
Your model and the area needing repair are enough to start.
A worn leather patch may need a local repair. Several damaged covers, flattened foam or loose cabin trim need a broader upholstery assessment. Keep sound original material wherever a durable repair is possible.
Sound leather can often be cleaned and recolored. A tear through the hide may need a replacement panel rather than surface filler. Compare these smaller repairs separately.
Replace damaged material, restore support and coordinate neighboring panels without automatically replacing the whole cabin.
Most interiors age in a few places first. Heat and sun work on the headliner and the top of the dashboard, the driver side wears faster than the passenger side, and the boot and carpets take the knocks. Mapping the cabin first keeps the quote honest and avoids replacing what is still good.
A seat can be refreshed at four very different depths. The right one depends on whether the leather itself is failing, whether one panel or the whole cover is gone, and whether the shape underneath has collapsed.
| Depth | What changes | When it fits | Repair scope |
|---|---|---|---|
| Recolour and repair | Original leather cleaned, filled and recoloured | Leather is sound but worn, faded or cracked on the surface | Leather seat repair |
| Single panel replacement | One ordinary upholstery panel replaced where the seat design permits | A bolster or base panel is torn through or brittle while the rest is fine | One ordinary panel, excluding any airbag deployment seam |
| Full re cover | An appropriate replacement cover is selected or made where the seat design permits | Most panels are worn, the colour is being changed or the material is being upgraded | Complete seat cover with safety compatibility checked |
| Foam and bolster rebuild | Collapsed foam is built up or replaced under the cover | The seat has lost its shape, the bolster folds over or you sit lower than before | Seat support checked separately from the cover |

A creased bolster can hide softened foam, a damaged support or a loose frame. Recoloring the leather will not correct a seat that sags or moves.
Cover Look for split material and seams under tension.
Foam Check compression, missing sections and the original contour.
Frame and supports Investigate movement, broken attachments or uneven support before trimming. Structural and electrical repairs need a separate estimate.
Many headliners use fabric bonded to foam on a molded board. Heat, humidity and age can weaken the backing so the cloth droops. A damp stain also calls for a leak check. Board damage, roof type and access determine whether new fabric or a replacement lining is appropriate.
If the backing has crumbled, more glue does not restore it. On a sound board, the usual repair is removal, careful preparation and new suitable headliner material. Leaks must be corrected first. A damaged board or roof blind is a separate item.

Roof trim can conceal curtain airbags. Removal must follow the procedure for the model and roof. New fabric, adhesive and fixings must not obstruct deployment or change designed release points.
These panels wear from hands, elbows and sun. Some are re covered in leather or microfibre, some are refinished, and some are better replaced as a part.
Armrests split along the stitching and door card inserts fade or lift. Inserts can be re covered, armrest leather can be replaced, and loose door card clips are renewed while the panel is off.
The upper dashboard can lift or crack after prolonged exposure. Access and the passenger airbag area must be checked before deciding between trim repair and replacement. Do not cover, stitch or alter an airbag deployment surface with an ordinary upholstery repair.
Peeling soft-touch finishes may be refinished or the affected part replaced. Button symbols, backlighting, clearances and switch operation must be retained. A cosmetic coating will not fix a failed switch.
Console lids and side panels wear at the edges where knees and hands rest. Lids can be re covered to match the seats, and broken hinges or catches are checked at the same time.
Sand, heel wear and spilled drinks age carpets fast in Dubai. Boot linings tear from luggage and sports gear. On convertibles the soft top fabric fades and the seams open over time.
Worn heel pads, stains and damaged carpet can be assessed for cleaning, a local repair or replacement. Floor mats must use the correct retention points and leave pedals unobstructed. Do not stack mats.
Torn or stained boot carpet and side linings are re covered or replaced, and loose trim clips are renewed.
Faded or torn convertible fabric and rear window seams. Fabric replacement needs a roof inspection before a quote. For the mechanism, hydraulics, seals and drains, see sunroof and convertible roof page.
Repair the water entry first. Wet carpet and underlay need lifting and assessment for drying or replacement. Check affected wiring and connectors separately. New carpet alone does not resolve trapped moisture or an electrical fault.
Material is chosen with you, with samples, before anything is ordered. The aim for most owners is a match to the original interior colour and grain, with any visible differences explained before you approve it.
Compare leather type, thickness, grain and perforation with the existing trim. Ventilated seats need their airflow paths retained. Heating elements and seat sensors need compatible materials and the correct refitting procedure.
Race-Tex is Porsche’s named microfiber material. A generic microfiber replacement is not automatically the same product. Confirm material identity, color and availability on the quote.
Textile inserts need matching weave, pattern direction and backing. Cleaning may help surface soiling, while worn or torn fabric may require replacement. Approve a sample rather than assuming a leather treatment is suitable.
The interior colour is checked against the car and the sample is viewed in daylight and cabin light before cutting.
Custom colours, two tone schemes and contrast stitching are discussed and quoted only if requested. Nothing changes the factory look unless you ask for it.
Modern Porsche seats and roofs carry safety systems behind the trim. These limits come before any styling choice.
An airbag deployment seam is not an ordinary upholstery seam. Do not cut, restitch, reinforce or cover it as a cosmetic repair. The exact seat, cover and manufacturer procedure must be checked before work is offered. If the required approved cover or procedure cannot be established, that safety-critical work must be referred to an authorized Porsche center.
Occupancy sensors, wiring and restraint connections must remain in their intended positions. Required diagnostic checks and any specified calibration must be included in the repair plan. Never bypass a sensor or warning with a resistor.
Record existing heating, ventilation and seat movement before work. Preserve the fitted elements, fans, perforations and foam air channels. Test the fitted functions afterward. Existing electrical faults and damaged elements require separate diagnosis and pricing.
Head airbags along the roof edge stay clear of glue, fixings and new material, and the headliner is refitted so it can still release as designed.
The sequence depends on the seat and trim design. Material, access, safety restrictions and price are agreed before removal. A custom sewing pattern does not establish that a cover is suitable for an airbag seat.
Covers, foam, heating, sensors and frame checked, and photos taken.
Approve the areas, material sample, complete price and expected timing.
Remove permitted trim using the appropriate procedure and inspect hidden damage.
Ordinary trim is made to fit. Safety-critical covers require the specified compatible replacement.
Foam is corrected, the cover is fitted and the seat refitted.
Warnings, heating, ventilation and movement tested with you.

Example costs, not records of completed customer jobs. Each example shows new repair materials, labor and VAT. The final quote depends on inspection, compatible materials and access.
Headliner fabric on a sound board
New headliner fabric and adhesive, normal lining removal, surface preparation and refitting. Existing roof equipment retained.
Materials AED 900 + labor AED 1,700 + VAT AED 130
A damaged board, roof blind or water leak would need a separate quote.
Two ordinary door armrest inserts
New matching leather on two removable armrest inserts, with preparation, fitting and checks of adjacent controls. No complete door-card replacement.
Materials AED 700 + labor AED 900 + VAT AED 80
This example excludes airbag trim, damaged switches and broken door-card structures.
One seat bolster foam repair
Local foam restoration beneath a reusable compatible cover, permitted removal and refitting, and checks of the fitted seat functions.
Materials AED 300 + labor AED 900 + VAT AED 60
Subject to the seat procedure. A new cover, occupancy sensor, heater or frame repair is not included.
A clear record makes it easier to compare the finished work and care for your interior afterward.
Keep the repaired areas, material name, approved color, itemized total and any warranty terms together.
Compare seams and panel alignment. Check seat movement, heating and ventilation where fitted, and any warning lights against the condition recorded before work.
Follow the care advice for the selected material. Avoid aggressive solvents and soaking perforated seats. Report lifting edges, loose trim or a new warning promptly.
Call with your Porsche model and the area you want restored. Photos are optional and help with an initial estimate. We can inspect the cabin when you visit, then request a VIN or trim details only if needed to match parts.
Short answers to what owners ask most about interior work.
Surface wear on sound leather may suit local recoloring. A torn panel, collapsed foam or widespread brittle material needs a different repair. A full cover is considered only after its compatibility with the seat and restraint systems is established.
An airbag seat cannot be treated like ordinary furniture. Deployment seams and cover specifications are safety-critical. We first establish the required cover and procedure. Where those requirements cannot be met, refer the work to an authorized Porsche center rather than modifying the seam.
The foam behind the fabric breaks down with heat and age, so glue has nothing solid to hold. A sound board may be recovered after removing the failed backing. A damaged board or a leak needs attention separately.
Yes. Many models carry head airbags along the roof edge. They are handled with the airbag precautions, and no glue or fixing is placed across their path.
Some finishes can be renewed, but symbols, illumination and switch function must be preserved. Replacement may be the better option when the coating or underlying component cannot be restored reliably.
The repair should retain the fitted functions. They are checked before and after work, with suitable cover materials and airflow paths preserved. Existing faults or damaged elements need a separate approved repair.
Colour is checked against the car and a sample is approved by you in daylight and cabin light before any material is cut.
Changes can be considered for suitable trim after safety compatibility and material availability are checked. Matching neighboring panels can add to the cost. Airbag deployment areas are not ordinary custom-stitching surfaces.
No. Race-Tex is a microfibre material used by Porsche. It is cleaned and repaired differently, and worn microfibre is usually re covered rather than recoloured.
Seat motors, switches and memory faults are electrical. Request electrical diagnosis before replacing upholstery. Trim work can then be coordinated with the confirmed repair.
Fabric work is planned here. The roof mechanism, hydraulics and drains are covered on the sunroof and convertible roof page, and both are checked together.
It depends on the number of seats, material availability and whether foam needs rebuilding. The expected time is written on your quote once the material is confirmed.
Planning estimates start around AED 600 to 1,600 for one ordinary armrest or door insert and AED 2,000 to 4,800 for one suitable complete seat cover fitted. The price guide includes labor and a 5% VAT allowance. Your written quote confirms the material, safety requirements and total.
We do not advertise blanket percentage discounts. If an offer applies to your job, its terms are written on the quote.
Tell us your Porsche model and which area needs attention. We will explain the repair choices, arrange an inspection and prepare an itemized estimate. You approve the material and work before it begins.
An enquiry is not a booking. The appointment is confirmed with you directly. Porsche Repair Dubai is an independent workshop and is not part of the Porsche Centre dealer network.